Cutting brick badly is the fastest way to ruin a wall, a patio, or a planter. The right saw turns a chipped, out-of-square mess into a joint that looks like it came off a fresh pallet, and the wrong one leaves you with dust everywhere and a blade that burns down in twenty minutes. This roundup covers the ten brick saws worth owning right now, from handheld masonry saws you can carry with one hand to walk-behind machines that cut a full slab in minutes.
We spent weeks comparing specs, owner reviews, blade options, and the real-world jobs each machine gets asked to do. What we kept coming back to is that “brick saw” covers several very different tools, and picking the wrong class is the single most common expensive mistake we see.
Some are wet machines built for slabs and foundations. Some are handheld cut-off saws for trimming headers, and some are light cordless tools for a weekend project in the garden. Our circular saw roundup covers a neighbouring category that gets confused with these constantly.
We also weighed the thing buyers actually complain about most: dust. Every saw below is rated on how well it controls the respirable crystalline silica that masonry cutting throws into the air, because that is a health issue and a mess issue at the same time. Updated for 2026, with specs and owner feedback current as of this writing.
Table of Contents
Top 3 Brick Saws of 2026
Best Brick Saws in 2026 at a Glance
All ten saws, side by side. Blade size, power source, and weight explain most of the differences; the last column is where each one actually earns its place.
| Product | Specifications | Action |
|---|---|---|
| Makita LW1401 14 Inch Cut-Off Saw |
|
Check Latest Price |
 Makita 4100KB 5 Inch Dry Masonry Saw |
|
Check Latest Price |
| SKIL SPT79A-10 7 Inch Walk-Behind Saw |
|
Check Latest Price |
 XtremepowerUS 3200W 16 Inch Wet Concrete Saw |
|
Check Latest Price |
 Milwaukee M18 FUEL 9 Inch Cut-Off Saw |
|
Check Latest Price |
 DEWALT 60V MAX 9 Inch Cordless Cut-Off Saw Kit |
|
Check Latest Price |
 Makita 4100NHX1 4-3/8 Inch Masonry Saw |
|
Check Latest Price |
 XtremepowerUS 2600W 14 Inch Wet Concrete Saw |
|
Check Latest Price |
 JACKCHEN 14 Inch Electric Concrete Saw |
|
Check Latest Price |
 WORKPRO 16 Inch Wet Concrete Saw |
|
Check Latest Price |
1. Makita LW1401 14 Inch Cut-Off Saw – Best Overall Brick Saw
Makita LW1401 Cut-Off Saw, 14″
14 inch blade
15 AMP motor
3800 RPM
37 lbs
Corded 120V
Fence adjusts to 45 degrees
Pros
- 15 AMP motor at 3800 RPM takes demanding masonry and metal cuts
- Fence adjusts to 45 degrees at three locations for accurate angle cuts
- Tool-less vice adjustment makes re-clamping quick
- Two-stage lock-off power button for operator convenience
Cons
- Includes an abrasive wheel
- so brick and concrete need a separate diamond blade
- At 37 pounds it is heavy for extended handheld work
The LW1401 is the saw we keep coming back to for general brick and block work, and it earned the top spot on the combination of owner satisfaction and volume of feedback. Owners consistently describe it as a well-built tool with a motor that does not hesitate, and 79 percent of reviews are five-star.
It is the same class of machine that professional landscapers on the Lawn Care Forum have long recommended for paver work, where the priority is a straight, quick cut rather than dust suppression.
What makes it genuinely useful is the fence. It adjusts to 45 degrees at three separate points, so you can cut an angled closure or a splayed header without fighting the workpiece. Tool-less vice adjustment means you spend your time on the wall, not on the clamp.
Owners also highlight build quality and simple setup. There is a two-stage lock-off power button so the saw does not start unexpectedly when you set it down between cuts, which matters when you are handling loose brick and block.
What we liked most
A 15 AMP motor at 3800 RPM is well matched to masonry and metal, and the adjustable spark guard keeps sparks away from you during cuts. For straight work, the fence holds angle consistently across material sizes, and the two-finger trigger reduces hand fatigue over a long day of cutting.
For anyone comparing saw classes, this is the fastest way to trim a course of brick to fit without hauling a wet saw out of the shop. The guide rail roundup covers a similar idea for straight-line accuracy in other materials.
Where it falls short
It arrives with an abrasive cut-off wheel, not a diamond masonry blade, so budget for a 14-inch diamond blade before your first brick cut. There is no water feed and no dust extraction port, which means every masonry cut is a dry cut and the dust has to be managed some other way. At 37 pounds it is a heavy lift for a full day of overhead or handheld work.
2. Makita 4100KB 5 Inch Dry Masonry Saw – Best for Clean Indoor Cuts
Makita 4100KB 5″ Dry Masonry Saw, with Dust Extraction
5 inch blade
13 AMP
12200 RPM
6.6 lbs
1-9/16 inch depth
1-3/8 inch dust port
Pros
- 13 AMP at 12200 RPM cuts brick and block plus quartz and stone with minimal vibration
- Swivel 360 degree dust port pairs with a shop vac and keeps indoor dust minimal
- Light at 6.6 pounds for freehand and plunge cuts
- Transparent upper guard gives a clear view of the cutting line
Cons
- 5 inch blade will not cut through a 1-1/2 inch edge
- Dust guard does not reach the workpiece so indoor work still needs a vacuum
- Setting up an accurate guide line takes practice and a track guide
This is a real masonry saw rather than a repurposed cut-off saw, and that distinction shows in the results. Users treat it as a proper brick tool: it cuts brick, block, quartz, and bluestone quickly, cleanly, and with almost no kickback. That near-perfect 4.6 rating across hundreds of owners is why we call it the best small machine in the group.
At 6.6 pounds you can hold it in one hand, plunge cut into a surface, and follow a line on a vertical face. The open underside and transparent upper guard give you a clear sightline to the cut, which is the difference between a clean edge and a chipped one when you are shaping stone veneer.
The headline feature is dust. A 1-3/8 inch extraction port swivels 360 degrees, so a shop vacuum can sit wherever the hose allows. Owners who pair it with a vacuum report indoor dust dropping to near nothing, which makes this the most indoor-friendly option here.
What we liked most
The 13 AMP motor at 12200 RPM is genuinely quick on hard material, and vibration stays low enough to keep the cut line true. Blade changes and depth adjustment are straightforward, and the included diamond blade is reported to hold up well.
The saw also attaches to an optional guide rail with adapter 198673-2, so straight rip-style cuts are achievable once you have the accessory.
For long straight cuts in stone or tile, our track saw guide explains the rail systems that make repeatable edges easier.
Where it falls short
The 5 inch blade will not cut through a 1-1/2 inch material edge or a countertop front lip, so plan your cuts around that limit. The dust guard does not extend down to the workpiece, so it is not a true dustless design and a vacuum remains mandatory for interior work. Getting an accurate straight line takes practice and a track guide rather than happening on the first pass.
3. SKIL SPT79A-10 7 Inch Walk-Behind Saw – Best for Slabs
SKIL 7″ Walk Behind Worm Drive Skilsaw for Concrete – SPT79A-10
7 inch blade
15 AMP worm drive
31.7 lbs
Walk-behind
Wet or vacuum dust control
Pros
- The only worm drive walk-behind concrete saw in its class
- Wheels leave no marks even on a fresh broom finish pour
- Two-finger trigger and folding handle reduce fatigue on long cuts
- Dual-field motor improves cooling and extends tool life
Cons
- Early cuts into green concrete can show chipping and spall
- Heaviest and most expensive machine here for occasional use
- Very fresh pours need the optional early-entry attachment
This is the only walk-behind saw in our group, and it is the right answer for a poured slab. Owners report cutting 12 by 12 grids across large areas efficiently, and several say the first job alone repays the purchase against the cost of renting gas walk-behinds. With 82 percent five-star ratings, the feedback is unusually consistent.
Straightness is the headline. Reviewers specifically note that the wheels leave no marks even on a broom finish pour that is only hours old. If your project is a driveway, a patio slab, or a shop floor, that is the detail that matters most and it is the one most walk-behinds get wrong.
Control comes from the two-finger trigger and an adjustable folding handle that extends to your height and folds for transport. Owners cutting long runs report noticeably less fatigue than they had with lighter machines.
What we liked most
The worm drive transmission gives the power and durability that gas walk-behinds are usually chosen for, without the exhaust. The dust management system accepts either water feed or vacuum extraction, which is called out as the deciding feature for compliance-conscious work. Die-cast aluminum housings, guard, and foot resist corrosion, which matters on a wet job.
A dual-field motor improves cooling and extends tool life during a long cut. The kit also includes a vacuum adapter with clamp, water feed attachment, side handle, wrench, and a carry bag.
Where it falls short
It is a serious machine, and for occasional work that is a hard case to make. Early entries into green concrete can produce small chips and spall, and a very fresh pour needs the optional early-entry attachment as a separate purchase.
4. XtremepowerUS 3200W 16 Inch Wet Concrete Saw – Best for Basements
XtremepowerUS 3200W Electric 16″ Circular Saw Concrete Saw Wet/Dry Concrete Cutter 20AMP With Water Line Attachment Wet Concrete Saw (Blade Included) Ideal for DIY House, Foundation
16 inch blade
3200 watts
20 AMP
4700 RPM
40 lbs
Water line and GFCI cord
Pros
- Cuts full-depth concrete in a single pass when the blade is sharp
- Water line and GFCI cord reduce airborne dust
- No gas fumes so it suits indoor and basement work
- 16 inch blade gives more cut depth than a 14 inch machine
Cons
- Needs a 30-amp circuit or breakers trip mid-cut
- Supplied diamond blade wears quickly on real concrete work
- Large blade can flex leaving cuts about 1/16 inch off square
This machine has the most owner feedback in the group at 523 reviews, and the picture is of a capable budget wet saw. Owners treat it as a tool that slices foundation walls, slabs, and pavers in single passes, and that pays for itself quickly against rental rates. The water feed is the reason it works indoors, and the GFCI cord means no separate adapter.
At 16 inches, the blade gives more cut depth than the far more common 14 inch machines, so a thick foundation wall or a stacked paver edge is a one-pass job. The dual integrated dust management system supports wet or dry cutting, and the extraction dust port vents debris to keep the cut line clear.
Users consistently praise the power-to-weight ratio and the low vibration. A metal guard design prevents spark injury during operation, and a double protection switch stops accidental startup. The motor is described as strong enough for granite, porcelain, and concrete.
What we liked most
The built-in water line reduces dust and extends blade life, which is the difference between a usable indoor saw and a dusty one. A double protection switch prevents accidental opening, and the extraction port keeps the cut line visible. It runs on 115 volts at 20 AMP, and the metal guard prevents spark injury during dry cutting.
There is no exhaust, so it is workable in a basement or a kitchen where a gas saw is not. At 40 pounds it needs two people for a move, so budget for that before it arrives.
Where it falls short
Electrical demands are the recurring complaint. It draws heavy current and repeatedly trips 20-amp circuits unless you run it on a 30-amp circuit with a 12-gauge cord. The supplied diamond blade is treated as a consumable and wears down quickly on real concrete, so plan to replace it.
A large blade can flex, which pushes cuts roughly 1/16 inch out of square, and there is one report of the cord GFCI failing after about half an hour of use.
5. Milwaukee M18 FUEL 9 Inch Cut-Off Saw – Best Portable Cordless
Milwaukee Electric – M18 Fuel 9 Cut-Off Saw W/ONE-Key
9 inch blade
18V M18 FUEL
6600 RPM
10.6 lbs
3.4 inch depth
Water quick connect
Pros
- Runs entirely on battery so it works on remote sites with no outlet
- Up to 50 percent lighter than gas with real cutting power
- 10.6 pounds with a 9 inch blade and 3.4 inch cut depth
- Onboard quick-connect water connection controls dust
- RAPIDSTOP blade brake stops the blade fast
Cons
- Sustained cuts beyond about 5 minutes overheat the battery pack
- Hot weather shortens run time further
- 3.4 inch cut depth is shallow for deep foundation work
When there is no power outlet, this is the tool. At 10.6 pounds with a 9 inch blade, it is the lightest cordless option here, and owners use it for remote sites, odd jobs, and repairs where a gas saw is not practical. It handles bolts, small rebar, scoring, and small concrete sections well.
Two details earn specific praise in reviews. The onboard quick-connect water connection controls dust on masonry cuts, which is unusual for a cordless saw. The RAPIDSTOP blade brake stops the blade quickly, which matters a lot when you are working near finished surfaces or your own hands.
Performance comes from 6600 RPM on a 7/8 inch arbor, with a 3.4 inch cut depth. Buyers on the M18 platform describe it as a genuine job-site tool rather than a compromise, and it cuts at a pace that rivals corded machines on the cuts it is designed for.
What we liked most
At up to 50 percent lighter than a gas machine of the same class, portability is the whole argument. The water connection means you can wet-cut without dragging a hose from a tap. Blade brake and 6600 RPM combine to make repeat cuts fast and safe on small work, like trimming a course of brick to fit an opening.
The 9 inch blade with 3.4 inch cut depth covers the majority of trim jobs a homeowner or repair contractor runs into.
Where it falls short
Thermal management is the dominant theme. Battery runtime is short, and straight cuts beyond about five minutes can overheat the pack. Hot-weather use shortens run time further and calls for several minutes of cooling between cuts.
At 3.4 inch cut depth it is not a deep foundation tool, and reviewers position it as a convenience tool for intermittent work rather than a production cutter.
6. DEWALT 60V MAX 9 Inch Cordless Cut-Off Saw Kit – Best for Battery Owners
60V 9 IN. CORDLESS CUT OFF SAW KIT
9 inch blade
60V MAX battery
Brushless motor
26.4 lbs
Kit with battery and charger
Pros
- Runs entirely on battery for sites with no power outlet
- Brushless motor and 60V platform deliver corded-class speed on 9 inch work
- Kit bundles saw battery and charger for buyers starting on the platform
Cons
- Listing copy is thin with no stated cut depth or speed
- Heaviest weight in the group for a 9 inch saw because of the kit configuration
If your shop already runs on DEWALT, this is the cordless entry point to 9 inch brick and block work. The kit format bundles the saw, battery, and charger, so someone buying into the platform for the first time is not left hunting for a separate battery. At 81 percent five-star, owners are broadly satisfied with what the platform delivers.
The brushless motor and 60 volt platform produce cutting speed that owners compare favourably to corded machines on 9 inch masonry work. That is the whole point of the class: the freedom of a battery without giving up the pace of a plugged-in saw on short, repetitive cuts.
What you get here is 9 inch blade capacity in a kit. That covers trimming brick to a mortar joint, cutting block down to length, and handling a repair where dragging a cord to the wall is impractical.
What we liked most
Running entirely on battery means you can cut on a remote part of a job with no outlet in reach, which is exactly the situation a corded saw cannot solve. The 60V brushless platform delivers corded-class cutting speed on 9 inch masonry, and the kit configuration means the whole system is together from day one.
Kit models like this one are worth comparing against other 9 inch cutting tools if you are building out a platform rather than buying a single saw.
Where it falls short
The listing itself is thin on detail, with a single feature line and no stated cut depth, speed, or included accessory list, so you are relying on owner reports for the real picture.
At 26.4 pounds it is the heaviest listed weight in this roundup for a 9 inch saw, which reflects the battery kit configuration rather than the tool alone. The total cost of a battery kit is higher than a corded saw, so it only makes sense if you want the platform.
7. Makita 4100NHX1 4-3/8 Inch Masonry Saw – Best Lightweight Option
Makita 4100NHX1 4-3/8″ Masonry Saw, with 4″ Diamond Blade
4 inch blade
9.6 AMP
14500 RPM
5.9 lbs
1-3/8 inch depth
Two blades included
Pros
- Cuts backer board and cinder block plus veneer stone and crack repair slots
- Very light with a clear view of the cut line from the open underside
- Ships with two diamond blades so a spare is on hand
- Compact 8-5/8 inch length fits tight spots
Cons
- 4 inch blade will not split an 8 inch cinder block
- 1-3/8 inch depth is shallow by masonry saw standards
- No dust extraction port so it throws a lot of airborne dust
This is the lightest-duty true masonry saw in the group, and reviews reflect a tool owners reach for on small jobs: trimming cinder block, cutting crack lines in concrete for caulking, shaping granite, and cutting backer board. Its low weight is the entire point, at 5.9 pounds with an open underside that makes the cut line easy to see.
You get two 4 inch diamond blades in the box, so a spare is on hand from the first cut. That matters more than it sounds when you are shaping stone and you know the first blade will dull.
Owners also like that it fits in a small tool bag and works in tight spots. At 8-5/8 inches long, it is easy to control one-handed and to get into a corner you would struggle to reach with a full-size saw.
What we liked most
The 9.6 AMP motor and high power-to-weight ratio give it 14500 RPM at 5.9 pounds, which is enough to cut hardy backer board, cinder block, and veneer stone smoothly. The open underside gives you a genuine view of the cut line, and the easy depth gauge adjustment makes repeatable trimming straightforward. Two blades are included, plus a socket wrench and spanner wrench.
Where it falls short
The 4 inch blade is too small to split an 8 inch cinder block, only to shorten it, so know which cuts you are attempting before you start. A maximum cut depth of 1-3/8 inches is shallow by masonry saw standards. There is no dust extraction port, so it throws a lot of airborne masonry dust and indoor work needs a vacuum at minimum. Taping the base plate helps protect finished stone from scratches.
8. XtremepowerUS 2600W 14 Inch Wet Concrete Saw – Best for Patios and Pavers
XtremepowerUS 2600W 14″ Concrete Saw Electric Cutter Wet/Dry Circular Concrete Cement Cut Off Floor Saw Water Feed Dust Port, Black/Red. Cutting Saw ONLY
14 inch blade
2600 watts
15 AMP
4300 RPM
30 lbs
Water feed and dust port
Pros
- Capable concrete
- paver
- and asphalt cuts for the money with no gas fumes indoors
- Roller guide wheels make long full-depth cuts less tiring
- Water feed keeps dust down when the cut stays wet
Cons
- Cutting saw only with no blade included
- 2600W motor bogs down on thick material such as a 12 inch foundation wall
This is the value entry in the roundup, and reviews split accordingly. Buyers cutting patios, retaining wall block, and shallow pavers are delighted, and a few report it outperforming far more expensive branded saws. Those who pushed it into 10 to 12 inch concrete report the motor stalling and stopping. Know your material thickness before you buy.
Guide roller wheels on the base reduce operator fatigue on long cuts, which is a meaningful difference when you are following a chalk line across a whole patio. The water feed and dust extraction port keep the cut line clear and the air cleaner than a dry cut.
At 30 pounds and 14 inches, it is more manageable to move around than the 16 inch machines, and there is no exhaust, so indoor cuts on a small job are workable.
What we liked most
It is wet or dry capable through the integrated water feed line and dust extraction port. A double protection switch prevents accidental opening, and a metal guard prevents spark injury during dry work. The motor is described as strong enough for granite, porcelain, and concrete, and the low vibration plus high power-to-weight ratio are called out repeatedly.
For a weekend patio project this is the tool that gets you a clean edge on pavers without renting anything.
Where it falls short
It is a cutting saw only, so no blade is included despite some listing copy suggesting otherwise. The 2600 watt motor bogs down and overheats on thick material such as a 12 inch foundation wall. It sags household circuits, so it needs an isolated 20-amp or larger breaker. Water hose fittings are not intuitive, they do not fit a standard garden hose without modification, and the instructions show the saw being pushed rather than pulled.
9. JACKCHEN 14 Inch Electric Concrete Saw – Best for Trenching
14″ Electric Concrete Saw with Diamond Blade, 4.8″ Cut Depth 110V
14 inch blade
3000 watts
4200 RPM
4.8 inch depth
110V
Roller guide wheels
Pros
- 4.8 inch cut depth is deeper than most 14 inch machines
- Roller wheels make lining up and following a cut line easier
- Plumbing contractor reports cutting 125 feet of trench in old concrete without a breaker trip
- Steel wrap-around handle reduces vibration on long cuts
Cons
- Included water pump is weak and the hose kinks easily
- Keeps tripping the breaker on a 20-amp circuit
- Included diamond blade is low quality and expected to be replaced early
This saw earns unusual credibility for a no-name brand from contractor reviews. One plumbing contractor reports cutting 125 feet of 18 inch-wide trench in 70-year-old concrete without a single breaker trip, and several owners rate it equal to or better than premium Bosch saws. The 3000 watt motor runs at 4200 RPM no-load speed.
Depth is its headline number. A 4.8 inch cut depth from a 14 inch blade is deeper than most machines in that class, which means fewer passes on a thick slab and less time wrestling the saw back and forth.
Roller wheels are the detail that comes up most in reviews. They make lining up on a chalk line and following a cut line much easier, and on trenching work that is where the accuracy comes from.
What we liked most
The steel wrap-around front handle with a rubber grip reduces vibration by 40 percent, which is what makes a long straight cut bearable. No-load speed of 4200 RPM gives accurate, controlled cutting, and the package includes a proportioning pot, priming funnel, wrench set, and a blade. It suits cement block, stone, asphalt roadbed, and decorative work.
Where it falls short
The included water pump is the consistent weak point: owners report it dying within 15 minutes, with the hose kinking, and many have replaced it with a hose adapter. It also keeps tripping a 20-amp circuit, so a 30-amp breaker is needed for reliable performance. The included diamond blade is low quality and is expected to be replaced early, and the side hex bolts can loosen during use and need re-tightening each pass.
10. WORKPRO 16 Inch Wet Concrete Saw – Deepest Cut in the Group
WORKPRO 16-Inch Wet Concrete Saw, 6.69-Inch Cutting Depth
16 inch blade
1600 watts
3100 RPM
6.69 inch depth
Wet system
30 amp circuit
Pros
- Deepest cut depth in the group at 6.69 inches for thick pours in fewer passes
- 1600W motor is a realistic rating for 110V
- Cuts sidewalk and blacktop plus 6 inch concrete with rebar
- Fume-free operation suits indoor kitchen and basement work
Cons
- Underpowered under load so the blade can stop on hard concrete
- GFCI plug is unreliable and has failed in the first five minutes for some buyers
This machine draws the most divided reviews in the roundup, and the split is instructive. Buyers cutting moderate-thickness sidewalk, blacktop, and rebar-bearing concrete are satisfied. One reviewer explicitly praises the honest 1600W motor rating as safer than the inflated 3000W-plus claims common on competing 110V listings, which is a point worth weighing.
Where it wins is depth. A 6.69 inch maximum cutting depth is the deepest in this roundup, so a 16 inch blade gets through a thick pour in fewer passes. The wet cutting system flows water directly onto the blade to cool it and cut down on dust and airborne particles.
The package is unusually complete: two carbon brushes, a wrench, a 3-way hose connector, water pump, two faucet connectors, and three water hoses. A dual safety switch requires both the trigger and the safety lock to be engaged, and the D-shaped handle reduces hand fatigue on long runs.
What we liked most
The 6.69 inch cutting depth is the reason to look at this machine at all: it reduces the number of passes needed on a deep cut. The smooth-rolling base glides across flat surfaces for straight cuts, and the 3100 RPM no-load speed gives consistent performance in concrete, large stone blocks, and cement-based materials.
It runs fume-free, which makes it practical for indoor kitchen and basement work where an exhaust saw is not an option.
Where it falls short
It is underpowered under load for a 16 inch blade: the motor bogs down and the blade can stop completely on hard concrete. The GFCI plug on the cord is unreliable, with reports of failure in the first five minutes and of overheating.
The included water pump and hose are poor quality, the hose is stiff and kinks, and it floats the pump out of the bucket. It also must be connected to a 30-amp or higher circuit, and the water attachment assembly has no usable instructions.
Diamond Blade Guide: Matching the Blade to Your Material
Most disappointing brick cuts are blade problems, not saw problems. A diamond blade does not cut masonry, it grinds it, and the blade you fit changes the finish, the dust, and how fast the edge wears down.
Continuous rim versus segmented
A continuous rim blade has diamond around the entire edge and cuts cleaner with less vibration, which is what you want on a visible brick face. A segmented blade has gaps between segments, sheds heat and debris better, and lasts longer in aggressive or wet cutting on concrete. For finished brick where the cut face shows, continuous rim is the better choice.
Bond and grit
Bond is how the diamond segments are held. A soft bond wears faster and gives up diamond as you cut abrasive material like brick and concrete, keeping the edge sharp for longer on hard material. A hard bond holds the segments longer and suits softer material such as asphalt. Higher grit means a finer, slower, smoother finish; lower grit cuts faster and rougher.
Matching material to blade
Clay brick and concrete pavers respond well to a medium-grit continuous rim blade. Concrete block and slab work is more abrasive, so a hard-bond blade with a segmented rim cuts faster and lasts longer. Stone and granite want the finest grit you can get away with. Keeping the cut wet extends blade life dramatically by cooling the edge and clearing slurry.
Once the blade is right, keeping the cut straight matters just as much. A guide rail or track system gives you a repeatable edge that a freehand pass never will, and for long straight work a wet saw with a fence is the same idea.
Dust, Silica and Wet Cutting: What to Do Before the First Cut
Respirable crystalline silica is the reason this category is regulated, and it is generated by every one of these saws. Dry cutting brick puts a large volume of it into the air, which is why the loudest complaint in every masonry forum is dust. Buyers run fans, wear masks, and adopt wet cutting purely to suppress it.
Will a wet saw cut bricks?
Yes. A wet saw cuts clay brick, concrete block, and pavers fine, and it is the standard way to cut brick cleanly. Water cools the blade, carries away slurry, and cuts dust at the source. Users regularly ask whether it burns the blade, and the answer is the opposite: a diamond blade wears out fastest when it runs dry, because the heat glazes the rim.
Dust control by saw class
A wet table saw produces the least airborne dust because the cut is submerged. A small handheld masonry saw with a 1-3/8 inch extraction port, such as the Makita 4100KB, drops dust dramatically when paired with a shop vacuum. A cut-off saw with no water feed and no dust port, such as the Makita LW1401, produces the most, and outdoors or with a mask is the realistic answer. A walk-behind saw with water or vacuum capability keeps a large floor cut compliant.
What about a circular saw with a concrete blade?
Masons do it, and reports on trade forums and Fine Homebuilding describe cutting through whole wall sections with a purchased diamond blade on a circular saw while running a window fan. We would not recommend it as a first approach.
A circular saw is not designed for masonry, a concrete blade throws far more dust than a wet saw, and the cut edge is harder to control. The dust that escapes a window fan still ends up in the room, so if you need an indoor masonry cut, use a wet saw or one with a real extraction port.
Corded, Cordless or Gas: Choosing a Power Source for Brick
Power source is really a question about where the work happens. Electric gives you a fume-free saw that runs indoors; battery gives you freedom from cords; gas gives you run time that never quits.
Corded electric
Every 14 inch and 16 inch wet saw in this roundup is corded, and so are the two Makita handheld machines. The catch is circuit capacity: several of these saws need a 30-amp breaker, and pushing them on a 20-amp circuit is the single most common complaint we read.
Cordless platforms
The 18V M18 FUEL 9 inch and the 60V MAX 9 inch are the two cordless routes. Buyers on those platforms report corded-class speed, and the M18 is lighter at 10.6 pounds. The trade-offs are runtime on sustained cuts, and platform lock-in, which is the concern landscapers raise most often when weighing an expensive pro cordless platform for a single saw.
Where gas still wins
For high-volume production cutting, a gas walk-behind or gas cut-off saw still runs cooler and longer. The worm-drive SKIL in this roundup gets close to that performance without the exhaust. For reach and trimming work, battery has largely won; our pole saw guide covers the same cordless logic for a different job, and the miter saw roundup is worth a look if you are also cutting trim to length on the same project.
Frequently Asked Questions
What is the best saw for cutting bricks?
A wet-cut masonry saw with a diamond blade is the best general answer: a 14-inch corded wet saw for pavers and block, a 16-inch saw for thicker foundation walls, and a handheld cut-off saw for trimming brick already in place. Our overall pick is the Makita LW1401 14 inch cut-off saw.
Will a wet saw cut bricks?
Yes. A wet saw cuts clay brick, concrete block, and pavers cleanly, and water cools the diamond blade, carries away slurry, and suppresses silica dust. Running the blade dry is what burns out a blade, not cutting brick wet.
What is the best cutoff saw?
For most brick trimming, the Makita LW1401 14 inch is the best cut-off saw in this roundup, with a 15 AMP motor at 3800 RPM and a fence that adjusts to 45 degrees at three points. On a job site with no power outlet, the Milwaukee M18 FUEL 9 inch is the strongest cordless option.
What is the best cutting tool for bricks?
It depends on the cut. A wet table saw for pavers and slabs, a handheld cut-off saw for trimming to a mortar joint, a 4 to 5 inch handheld masonry saw for shaping and small trim work, a walk-behind saw for large pours, and a cordless saw where there is no outlet.
Where can I find a brick cutting saw for sale?
Home improvement and building supply stores carry the handheld options, while the larger 14 inch and 16 inch wet saws and walk-behinds are more often found through specialist tool retailers and online marketplaces. Tool rental is worth it for a one-off slab or trenching job.
What brand makes the best saws?
Makita covers the widest range here, from a 4-3/8 inch handheld masonry saw to a 14 inch cut-off saw. Milwaukee and DEWALT are the strongest cordless platforms, and SKIL stands out in walk-behinds. For a no-name wet saw, read the blade and circuit requirements closely before buying.
Best Brick Saws: The Short Version
For most people, the Makita LW1401 14 inch cut-off saw is the right first brick saw: strong motor, an accurate fence for angle cuts, and hundreds of owners confirming it holds up. If your work is pavers, slabs, or anything indoors, step up to a wet saw instead, and pick a 16-inch blade only if you regularly cut material thicker than a 14-inch machine can reach in one pass.
The rest of the shortlist is straightforward. Go cordless when there is no outlet, choose the smallest handheld masonry saw that clears your material, and use a walk-behind for a slab. Whatever you pick, budget a quality diamond blade, a 30-amp circuit for the big electric saws, and a real dust plan before the first cut. That is the full answer to finding the best brick saws for 2026: match the class to the job, then control the dust.